Aquarium Canister Filter Parts

Cascade 1000 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1000 Canister filter Motor Unit DOES match their manufacturer sku of CCF214.

• Replacement Cascade 1000 Canister Filter Motor Unit
• Cascade 1000 Replacement Motor only
• Does not include impeller - sold separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

This Aquatop Replacement Quick Disconnect Valve fits the CF400-UV Canister Filter. O-rings are included for secure seals. This is a genuine Aquatop factory replacement part. 

• Replacement quick disconnect valve for Aquatop CF400-UV Canister Filter
• O-rings included
• Genuine Aquatop replacement part

This Aquatop Replacement Impeller Assembly fits CF500-UV Canister Filters. The replacement assembly comes complete with impeller shaft, rubber grommets, fan blade, and magnet.

• Replacement impeller for Aquatop CF500-UV Canister Filter
• Includes shaft, rubber grommets, fan blade & magnet
• Genuine Aquatop replacement part

Cascade 700 & 1000 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 700 (CCF2UL) and 1000 (CCF3UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 700 (CCF2UL) & 1000 (CCF3UL) canister filters
• Prevents costly damage to filter motor

This gasket only works for the Cascade 700 and 1000 model filters. Other models will require different gaskets.

This Aquatop Replacement Media Tray fits CF500-UV Canister Filters. Each pack contains one tray. Note that media trays do not include filter pads or media.

• Replacement media tray for Aquatop CF500-UV Canister Filter
• Filter pads & media sold separately
• Genuine Aquatop replacement part

Cascade 1500 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1500 Canister filter Motor Unit DOES match their manufacturer sku of CCF314.

• Replacement Cascade 1500 Canister Filter Motor Unit
• Cascade 1500 Replacement Motor Only
• Does Not Include Impeller - Sold Separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

The Aquatop Replacement Barrelhead O-Ring for CF500-UV provides a tight fit and a secure seal for your Aquatop CF500-UV Canister Filter. Maintain a complete seal is essential for efficient operation and leak prevention.

• Replacement O-ring for Aquatop CF500-UV Canister Filter
• Maintains seal & prevents leaks
• Genuine Aquatop replacement part

API Filstar XP replacement parts bag replaces the former Rena parts tray. Please refer to the list of parts below to see what is included in the new parts bag.

• Kit includes: 1 inlet pipe, 1 inlet pipe cap, 1 strainer, 2 pipe extensions, 4 tube clamps, 4 suction cups, 4 suction cup supports, 1 gooseneck outlet pipe diffuser and 1 U-shaped tube
• Filstar XP Parts fit all XP Canister Filters
• Use with API Filstar XP S, M, L, XL - Formerly XP1, XP2, XP3 and XP4 Parts Tray

Use this replacement parts bag for all Filstar XP Small, Medium, Large, X Large canister filters.

Hagen Fluval Ribbed Hosing is flexible, non-kink tubing usable for all applications with Fluval 305 / 405 and Fluval 304 / 404 filters. Features two .75" inside diameter attachment ends. Contains only 1 hose.

• Flexible, non-kink tubing
• Usable for all applications with Fluval 305-405 filters
• Contains 1 hose

These Aquatop Replacement Media Trays fit CF400-UV Canister Filters. Each pack contains all three trays for complete filtration. Note that media trays do not include filter pads or media.

• Replacement media trays for Aquatop CF400-UV Canister Filter
• Filter pads & media sold separately
• Genuine Aquatop replacement part

The Cascade 1200 & 1500 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 1200 (CCF4UL) and 1500 (CCF5UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 1200 (CCF4UL) & 1500 (CCF5UL) canister filters
• Prevents costly damage to filter motor

As gaskets get older, pressure and wear-and-tear cause them to lose their snugness. Replace misshapen gaskets to maintain a water-tight fit.

This gasket only works for the Cascade 1200 and 1500 model filters. Other models will require different gaskets.

The Rena Filstar XP3 Impeller replaces the impeller for the Rena Filstar XP3 or API Filstar XP-L Canister Filters. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Rena Filstar XP3 and API Filstar XP-L power filters
• Includes impeller, shaft & bearing

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: This impeller assembly fits Rena XP3 and API XP-L Filstars filters only. Other Filstar models require different impellers.

The Marineland C-Series C-360 Inlet & Outlet Tube Set features replacement parts for the Marineland 360 C-Series Canister Filters. Inlcudes inlet tube, outlet tube, and inlet tube strainer.

• Replacement inlet & outlet tubes
• Fits Marineland 360 C-Series Canister Filters
• Includes inlet tube, outlet tube & inlet strainer

The Aquatop Replacement O-Ring Set for the CF500-UV Canister Filter Quick Disconnect Valve Block includes 2 O-rings, one for each valve. O-rings that are cracked, torn, or misshapen can lead to water leaks, loss of pressure, and reduced filter performance.

• 2 O-rings for CF500-UV Canister Filter Quick Disconnect Valve
• Keeps seal secure & helps filter run at optimal efficiency
• Genuine Aquatop replacement part

Note: Aquatop parts are designed and intended as original equipment replacement only for Aquatop branded products. Use in brands other than Aquatop can result in poor performance, leaks, and failure and Aquatop offers no warranty for any problem arising from the use of Aquatop replacement parts in another brand of product.

The Rena Filstar XP Gasket Kit with O-Rings includes an Impeller Cover Gasket, Canister Gasket (for motor/lid), and Quick-Disconnect O Rings to maintain all seals on your Filstar filter. Will fit Rena Filstar XP1, XP2, XP3 & XP4.

• Replacement gasket & O-ring kit for Rena Filstar XP
• Fits all Filstar XP models (XP1, XP2, XP3, XP4)
• Use to maintain proper seals and prevent leaks & damage to filter

The Marineland C-Series C-360 O-Ring & Gasket Kit contains all the parts you need to maintain proper, fitted seals throughout your C-360 Canister Filter.

• Maintains proper seals
• Makes total maintenance simple
• Easy to replace

O-Rings and gaskets can become significantly less effective when the initial seal is broken. Whenever doing extensive repairs or maintenance on your filter, replacing all O-rings and gaskets can help ensure no further problems arise.

Hagen Impeller Cover Fluval replacement part. Impeller Cover Replacement part for the Fluval 304-404 and 305-405 Filters made after July 2001.

• Replacement impeller cover for Hagen Fluval filters
• Fits Fluval models 304-404 & 305-405
• For models with straight impeller blades made after July 2001

NOTE: Please make sure your impeller has straight fan blades. (If your filter is older than July 2001 and/or has curved fan blades then you will need to purchase the OLD MODEL: Part Number A-20155)

• Replacement quick disconnect valve for Aquatop CF500-UV Canister Filter
• O-rings included
• Genuine Aquatop replacement part

Rena Filstar XP Canister Clips are used to anchor the canister lid to the rest of the filter canister. These clips are a universal fit for all API Filstar XP and Rena Filstar XP Canister Filter models.

• Replacement clips for canister filter lid
• Universal fit for API Filstar XP & Rena Filstar XP canister filters
• Pack of 2

These clips fit the following Filstar XP models:

• Filstar XP1
• Filstar XP2
• Filstar XP3
• Filstar XP4

API Rena Filstar XP kink free tubing is a high quality non kink silicone tubing which is 5 feet long and 0.75" diameter. This tubing is factory tubing that will replace tubing in your Rena XP1, XP2, XP3 or XP4.

• Factory replacement kink-free tubing
• Includes two 5' long replacement tubes
• Filstar XP Tubing is 3/4" diameter

The API Rena Filstar Extension Tube & Strainer Kit includes 2 inlet pipe extensions and 1 inlet strainer for easy customization of your XP aquarium filter to fit deeper aquariums. Fits all API Filstar XP & Rena Filstar XP models.

• Extend & customize inlet tubing on XP canister filters for deeper aquariums
• Includes two 3" inlet pipe extension tubes and 1 inlet strainer
• Fits all API Filstar XP & Rena Filstar XP models

Replacement Impeller O-ring for Penn Plax Cascade Canister Filters. This O-ring maintains a quality seal and protects the impeller from leaks and water damage. Fits Cascade models 700 & 1000.

• Replacement Impeller O-ring for Penn Plax Canister Filters
• Fits models Cascade 700 & Cascade 1000
• Maintains an effective seal to prevent damage to impeller

Marineland C-Series C-360 Suction Cups are used to firmly attach the filter's intake and outlet tubes to your aquarium walls.

• Replacement suction cups for Marineland C-Series C-360 External Canister Filter
• Used to anchor intake & outlet tubes to aquarium walls
• Simple clip-on attachment

Moisten suction cups when applying. Suction cups should be used to attach the intake tube to the inner wall of the aquarium, and the outlet tube to the outer.