Aquarium Power Filter Parts

Marineland Replacement Part for Eclipse System Motor Pump / Filtration Assembly - Eclipse System 3 Gallon, Hex 5 Gallon Aquarium, Hex 7 Gallon Aquarium, Corner 5 Gallon Aquarium, and Eclipse Explorer Aquarium.

• Replacement Part for Eclipse System Motor Pump / Filtration Assembly
• Pump & filtration assembly only
• Impeller, impeller mount, inlet tubing, and strainer are not included

NOTE: The impeller, impeller mount, inlet tubing, and strainer are NOT INCLUDED! Make sure you put the impeller and impeller mount into the new motor when it arrives so that the motor can pump water into the filter. Please use the quick links below to purchase these parts if necessary.

Tetra T3 Energizer Replacement Motor for Whisper 2, 3, 40 & 60, and Top Fin 40 & 60 Power Filters. The Energizer contains the entire motor mechanism for your filter and comes complete with O-ring and power cord. Read replacement notes below!

• Replacement Energizer for Whisper Power Filters
• Fits Whisper models 2, 3, 40 & 60 and Top Fin models 40 & 60
• Includes O-ring & power cord

Impeller, impeller mount, inlet tubing and strainer are NOT INCLUDED!

Note: This part rarely needs to be replaced. If your power filter is not running correctly, always replace the impeller first.

These genuine Tetra extension tubes & strainer replacements fit Tetra Whisper EX20, EX30 and EX45 Power Filters. The EX20, EX30 and EX45 replacement tubes and strainer are made of durable plastic and are black in color.

• Genuine Tetra replacement parts
• Replacement extension tubes & strainer
• Fits Whisper EX20, EX30 and EX45 Power Filter

Includes: 2 Extension Tubes & 1 Strainer.

This Cascade Black Hose Set replaces the connective tubing for Cascade Canister Filter models 700, 1000, 1200 & 1500. Contains 2 5' hoses.

• Replacement aquarium filter tubing
• Fits Cascade Canister Filter models 700, 1000, 1200, & 1500
• Contains 2 5' hoses

Marineland Eclipse Hood & Marineland Emperor Power Filter Bio-Wheel Bearing replacements. These bearings fit any of the Eclipse or Emperor aquarium power filters, and are essential to keeping the bio-wheel spinning properly.

• Replacement bio-wheel bearings
• Fit all Eclipse Hood & Emperor aquarium power filters
• Allow bio-wheel to maintain proper spin & effective bio-filtration

Bearings keep the bio-wheel spinning at the proper distance from the return water, resulting in the most effective bio-filtration.

These bearings fit the following Marineland models:

• Emperor 280
• Emperor 400
• Eclipse 1
• Eclipse 2
• Eclipse 3

Marineland's Filter Cover for Penguin 150B is a grey plastic cover for the back of your Penguin 150B.  This filter cover will help minimize water noise, splashing and evaporation.  

• Replacement bio wheel cover for the penguin 150B power filter
• Fits over back of the filter assembly
• Prevents splashing and evaporation

**Bio-wheel plastic cover sold sperately

Marineland Bio-Wheel Cover for Penguin 200B is a replacement bio wheel cover for the penguin 200b power filter. This grey plastic rounded cover piece fits over the bio-wheel assembly.

• Replacement bio wheel cover for the penguin 200b power filter
• Grey plastic rounded cover piece fits over the bio-wheel assembly
• Prevents splashing and evaporation

Prevents splashing and evaporation all while providing an eye appealing alternative to a not so aesthetically pleasing bio-wheel.  

**Grey plastic filter box cover sold seperately.

Marineland's Penguin 150B Intake Tube is a replacement part for the Penguin Power Filter.  This "J" shaped black intake tube draws water to the back filter compartment from within the aquarium.  

• Replacement part that will fit your 150B Power Filter
• "J" shaped black intake tube
• Helps draw water into the back filter compartment from within your aquarium

**Intake strainer sold seperately

This Marineland Impeller Assembly is a genuine factory replacement part for the Emperor 400 Power Filter. Pack includes the complete impeller assembly and cover.

• Replacement impeller for Emperor 400
• Includes impeller assembly & cover
• Genuine Marineland replacement part

Marineland Bio-Wheel Cover for Penguin 150B is a replacement bio wheel cover for the 150B power filter. This grey plastic rounded cover piece fits over your bio-wheel assembly preventing splashing all while giving a cleaner appearance.  

• Replacement bio wheel cover for the 150B power filter
• Grey plastic rounded cover piece
• Fits over your bio-wheel assembly preventing splashing

**Grey plastic filter box cover sold seperately

Marineland's Penguin 150B Impeller Housing is a replacement part for the 150B Power Filter. This part keeps the impeller and the "J" shaped black intake tube connected in line which allows the filters suction to function properly.

• Replacement part for the 150B Power Filter
• Keeps the impeller and the "J" shaped black intake tube connected in line
• Allows the filter's suction to function properly

Ensure to check the rubber bushing on the ends of your impeller to make sure there is not too much wear and tear (damaged bushings can cause the filter to function improperly)

Marineland's Penguin 200B Intake Tube is a replacement part that will fit your 200B Power Filter.  This "J" shaped black intake tube will help draw water into the back filter compartment from within your aquarium.

• Replacement part that will fit your 200B Power Filter
• "J" shaped black intake tube
• Helps draw water into the back filter compartment from within your aquarium

**Intake strainer is sold seperately

Marineland Eclipse 3 Motor Power Filter Replacement Part. Eclipse 3 Motor only!

• Eclipse 3 Motor Power Filter Replacement
• Eclipse 3 Motor only
• NOTE - DOES NOT include Impeller, impeller mount, inlet tubing, or strainer - must be purchased separately.

NOTE: The impeller, impeller mount, inlet tubing, and strainer are NOT INCLUDED! Make sure you put the impeller and impeller mount into the new motor when it arrives so that the motor can pump water into the filter.

Marineland's Penguin 100 - 200B Extension Tube is for the 100B, 150B, and 200B Power Filters. The length of this extension tube is the same as the length of the tube that fits in between the intake strainer and mid-level strainer in your bio-wheel filter.

• Extension Tube for the 100B, 150B, and 200B Power Filters
• Helps evenly filter your aquarium water
• Especially useful for extremely tall aquariums

Perfect to help evenly filter your aquarium water (especially useful for extremely tall aquariums).

*A mid-level strainer (sold seperately) is necessary to connect to the intake tube