Reptile Lighting Accessories

Zoo Med Repti-Lamp Stand for Reptiles is for use in suspending metal dome or wire basket lamp fixtures (Great for use with a Repti Clamp Lamp, Economy Clamp Lamp or Brooder Lamp). Easily adjusts to fit most standard size terrariums.

• Suspends metal dome or wire basket lamp fixtures
• Easily adjusts to fit most standard size terrariums
• Prevents accidental tipping of heat fixtures
• 1 year warranty

Suspends heat fixtures that would otherwise be difficult to secure or use. Special clips keep power cords secure and out of the way. Lamp and light bulb sold separately.

Powersun UV lamps: Use the Reptile Lamp Stand to vertically orient fixture and bulb. Self-ballasted mercury vapor lamps must point straight down to prevent damage and premature burnouts. Stable foot goes underneath terrarium so stand cannot be knocked over. Decreases vibration/moving of bulbs which will increase the "burn life" of your bulbs.

Sizing:
Small: 12"L x 24"H (10, 15 & 20 Gallon Tanks)
Large: 15"L x 38"H (20-100 Gallon Tanks)

The Zoo Med Nano Dome Hold Down Kit is a compact bracket that keeps your Nano Dome securely fastened to the terrarium screen cover. This handy accessory eliminates the need for a hanging light fixture and makes it easy to move the cover without displacing the Dome.

• Securely attaches Nano Dome to screen cover
• Convenient spring-hook attachment
• No additional hardware required
• Allows easy removal of screen cover without displacing dome fixture

Directions:

1. Remove the dome hanger supplied with the lamp fixture if installed. Place bracket onto the dome between the sockets.
2. Install one end of each spring onto the bracket, and the other end onto the screen mesh of the terrarium cover as shown. One end of the spring is open wider than the other. The wider end is inserted into the screen mesh.
3. Check to verify that the fixture is securely attached. When replacing lamps, remove the springs to access the light socket. Do not over-stretch the springs to remove or install light bulbs or heat emitters.

The Zoo Med Nano Combo Dome Hold Down Kit is an compact bracket that keeps your Nano Combo Dome securely fastened to the terrarium screen cover. This handy accessory eliminates the need for a hanging light fixture and makes it easy to move the cover without displacing the Combo Dome.

• Securely attaches Nano Combo Dome to screen cover
• Convenient spring-hook attachment
• No additional hardware required
• Allows easy removal of screen cover without displacing dome fixture

Directions:

1. Remove the dome hanger supplied with the lamp fixture if installed. Place bracket onto the dome between the sockets.
2. Install one end of each spring onto the bracket, and the other end onto the screen mesh of the terrarium cover as shown. One end of the spring is open wider than the other. The wider end is inserted into the screen mesh.
3. Check to verify that the fixture is securely attached. When replacing lamps, remove the springs to access the light socket. Do not over-stretch the springs to remove or install light bulbs or heat emitters.